|
| Stick Electrodes - Mild Steel - Low Hydrogen |
| Pipeliner 16P | E7016 H4 | AC | Pipeliner® 16P has unique properties that enable low hydrogen SMAW root passes meeting strict pipe welding requirements. It is recommended for root pass welding of up to X100 grade pipe. For vertical up pipe welding - choose Pipeliner® 16P. |
| Pipeliner 17P | E7018-1 H4R | AC | Pipeliner® 17P has high operator appeal with a smooth arc, square burn-off and excellent puddle control. It is recommended for fill and cap pass welding of up to X65 grade pipe. For vertical up pipe welding - choose Pipeliner® 17P. |
| Stick Electrodes - Low Alloy |
| Pipeliner 7P+ | E7010-P1 | DC+ | Pipeliner® 7P+ allows for increased fill capabilities resulting in fewer fill passes. It is capable of meeting stringent pipeline welding requirements when tested for low temperature impact toughness. It is recommended for root pass welding of up to X80 grade pipe, and hot, fill and cap pass welding of up to X65 grade pipe. For vertical down pipe welding - choose Pipeliner® 7P+. |
| Pipeliner 8P+ | E8010-P1IE8010-G | DC+ | Pipeliner® 8P+ is the highest strength cellulosic electrode in the Lincoln Pipeliner® family and allows for increased fill capabilities resulting in fewer fill passes. It is recommended for root pass welding of up to X80 grade pipe, and hot, fill and cap pass welding of up to X70 grade pipe. For vertical down pipe welding - choose Pipeliner® 8P+. |
| Stick Electrodes - Low Alloy - Low Hydrogen |
| Pipeliner 18P | E8018-G H4R | AC | Pipeliner® 18P has high operator appeal with a smooth arc, square burn-off and excellent puddle control. It is recommended for fill and cap pass welding of up to X70 grade pipe. For vertical up pipe welding - choose Pipeliner® 18P. |
| Pipeliner 19P | E10018-G H4R | AC | Pipeliner® 19P has high operator appeal with a smooth arc, square burn-off and excellent puddle control. It is recommended for fill and cap pass welding of up to X80 grade pipe. For vertical up pipe welding - choose Pipeliner® 19P. |
| Stick Electrodes - Low Alloy - Low Hydrogen - Vertical Down |
| Pipeliner LH-D100 | E10045-P2 H4R | DC+ | Pipeliner® LH-D100 is a low hydrogen high deposition electrode specially designed for the vertical down welding of pipe. It is recommended for fill and cap pass welding of up to X90 pipe, as well as pipe repair and hot tapping applications. For low diffusible hydrogen, high productivity and operator appeal - choose Pipeliner® LH-D100. |
| Pipeliner LH-D80 | E8045-P2 H4R | DC+ | Pipeliner® LH-D80 is a low hydrogen high deposition electrode specially designed for the vertical down welding of pipe. It is recommended for fill and cap pass welding of up to X70 pipe, as well as pipe repair and hot tapping applications. For low diffusible hydrogen, high productivity and operator appeal - choose Pipeliner® LH-D80. |
| Pipeliner LH-D90 | E9045-P2 H4R | DC+ | Pipeliner® LH-D90 is a low hydrogen high deposition electrode specially designed for the vertical down welding of pipe. It is recommended for fill and cap pass welding of up to X80 pipe, as well as pipe repair and hot tapping applications. For low diffusible hydrogen, high productivity and operator appeal - choose Pipeliner® LH-D90. |
| Fast Freeze, Out-of-Position Pipe Welding, Mild Steel and Low Alloy Steel Stick Electrodes |
| Pipeliner 6P+ | E6010 | DC+ | Pipeliner® 6P+ sets the standard for root pass welding in the pipeline industry. It is recommended for root pass welding in either vertical up or vertical down welding positions of up to X80 grade pipe as well as hot, fill and cap pass welding of up to X60 grade pipe. For all position pipe welding - choose Pipeliner® 6P+. |
| Gas-Shielded Flux-Cored Wire |
| Pipeliner G70M | E71T-1M-JH8 | DC+ | Pipeliner® G70M is designed for use with semiautomatic and mechanized welding systems and has the best operator appeal in difficult welding positions. It is recommended for hot, fill and cap pass welding of up to X70 grade pipe. For vertical up pipe welding - choose Pipeliner® G70M. |
| Pipeliner G80M | E101T1-GM-H8 | DC+ | Pipeliner® G80M is higher strength than G70M. It is recommended for hot, fill and cap pass welding of up to X80 grade pipe. For vertical up pipe welding - choose Pipeliner® G80M. |
| Pipeliner G90M | E111T1-K3M-JH8 | DC+ | Pipeliner® G90M is the highest strength flux-cored wire in the Pipeliner family. It is recommended for hot, fill and cap pass welding of up to X80 grade pipe. For vertical up pipe welding - choose Pipeliner® G90M. |
| Self-Shielded Flux-Cored Wire |
| Pipeliner NR-207+ | E71T8-K6 | DC- | Pipeliner® NR-207+ has the portability of stick electrode and the productivity of wire. It is recommended for hot, fill and cap pass welding of up to X70 grade pipe. For vertical down pipe welding - choose Pipeliner® NR-207+. |
| Pipeliner NR-208-P | E81T8-G | DC- | Pipeliner® NR-208-P has the portability of stick electrode and the productivity of wire. It is capable of producing impact values of 27 J (20 ft·lbf) @ -29°C (-20°F). It is recommended for hot, fill and cap pass welding of up to X80 grade pipe. For vertical down pipe welding - choose Pipeliner® NR-208-P. |
| Pipeliner NR-208-XP | E81T8-G | DC- | Pipeliner® NR-208-XP has been micro-alloyed to be capable of exceeding impact values of 68 J (50 ft·lbf) @ -29°C (-20°F). It is recommended for hot, fill and cap pass welding of up to X80 grade pipe. For vertical down pipe welding - choose Pipeliner® NR-208-XP. |
| MIG Wire |
| Pipeliner 70S-G | ER70S-G | DC+ | Pipeliner® 70S-G has a low silicon level for unblemished welds with less clean up required. Provides good back bead shape when using the STT® process on root passes. It is recommended for root pass welding of up to X100 grade pipe as well as hot, fill and cap pass welding of up to X70 grade pipe. For all position welding - choose Pipeliner® 70S-G. |
| Pipeliner 80S-G | ER80S-G | DC+ | Pipeliner® 80S-G is the highest strength MIG wire in the Pipeliner® family. Recommended for root pass welding of up to X100 grade pipe as well as hot, fill and cap pass welding of up to X80 grade pipe. For all position welding - choose Pipeliner® 80S-G. |
| Pipeliner 80Ni1 | ER80S-G | DC+ | Pipeliner® 80Ni1 micro-alloyed MIG wire is designed for semi-automatic or automatic welding of root, hot, fill and cap passes on up to X80 grade pipe and root passes on up to X100 grade pipe. Capable of producing Charpy V-Notch impact properties of 69 - 95 J (51 - 70 ft·lbf) @ -50°C (-58°F), Pipeliner® 80Ni1 is designed for tough pipeline jobs. For an electrode that meets the expanding demands of higher strength pipe and severe conditions - choose Pipeliner® 80Ni1. |
| |
|
